Let’s face it: you probably have picture frames or decorations hiding some small holes in your drywall. Most people hold off on filling small holes until it’s time to repaint the wall. Even then, some people assume you can just paint right over the holes to cover them up. There’s a much better way to ensure you have smooth and uniform walls, however. Read on to learn how.
Repairing small holes
If the areas you are attempting to repair are mainly small holes from picture frames made by hooks and nails, there’s a relatively easy way to make your wall look like new again.
- First, you’re going to want to pull out any debris from the whole, including loose or chipped pieces of drywall. This is an important step that many people omit. If you put your spackle or paste in a hole that has loose drywall in it, it could just fall out when it drys.
- Next, fill up the whole with spackle and smooth it with a putty knife or any flat surface available to you. Read the directions on the paste to determine how long it will take to dry.
- Once dry, sand down the area using a fine-grit sandpaper (at least 120 grit). Rub your hand over the area to see if there are any bumps. Be careful not to sand too hard if your wall is textured at all. Once the spackle is smooth and flush with the wall, you can move onto the next step: repainting.
Repainting your wall
It’s good practice to save leftover paint and color samples for the walls of your house. If you’ve done this, your work here will be a lot easier. When you repaint the area you’ve sealed and sanded you’ll want to paint over the edges slightly to blend it with the paint already on your wall. This will, hopefully, make it so the repaired area doesn’t stand out. Remember not to panic when the paint appears darker and more vibrant where the repair is. Once it dries it will more closely resemble the paint on the wall.
It may be necessary to put a second coat onto the area, so don’t put your paint away just yet. In the meantime, this is a great opportunity to check the walls in the room for any other areas that need to be touched up.
It doesn’t look quite the same
If you find yourself staring at the one-inch area of your wall that looks slightly different than the rest, you have two options.
- Back away, go do something else for a while and then come back later. Was it obvious to you where the spot was after taking a break? Sometimes artists get too close to their work and focused on details that are only apparent to them. Remember that no one is likely to notice but you.
- If it’s driving you nuts, you could always use this opportunity to repaint the entire wall. Many rooms now have an “accent” wall, meaning one wall painted differently than the other three. This is a great way to add a hint of color to a room. Find a color that will nicely accent the walls and head to the paint store.